Features:

• Australian made, wrought from a single sheet of specially-made stainless steel
  
• 22cm sauteuse pan for blanching or stir-frying vegetables, poaching, sauces
• Suitable for any heat surfaces - it can go from stove to oven to BBQ
• Non-nickel without any toxic chemical coatings
• Highly conductive, meaning our cookware is more energy efficient
• Low-maintenance cookware option, and are dishwasher friendly
• Cooks like iron, cleans like stainless
• 3mm-thick wrought non-nickel stainless
• Long, ergonomic, vented handle that stays cool on the stovetop 
• Stamped with the month and year of manufacture
  
• Calico storage bag included

Warranty:

Solidteknics offers a multi-century warranty for all defects related to materials or manufacturing occuring during normal cooking. Note this is a manufacturing warranty for defects and is not valid for improper use, lack of maintenance, or 'change of heart'. For the warranty to remain valid, Solidteknics care instructions must be followed.

Ferritic, non-nickel stainless steel

Total length: 45.5cm
Diameter: 22cm
Height of bowl: 5.4cm
Height at handle: 10.5cm
Weight: 1.1kg
1.75l Capacity

Solidteknics nöni™ Cleaning, Care and Tips & Tricks

PLEASE NOTE BEFORE USE: We recommend washing your nöni™ pans with hot, soapy water before your first cook.

Solidteknics ferritic nöni™ stainless steel range is perfect for all liquid boiling, slow cooking and acidic sauces. Super low maintenance - no seasoning required! Cooks like iron, cleans like stainless. Suitable for all heat sources including gas, induction, electric, oven, BBQ and even campfire. nöni™ is designed to be workhorse pans, for generations of cooking. As it is non nickel, it may not stay as shiny as regular stainless steel, however it is far superior in every important way: health, sustainablility, and performance!

Lower your heat! 

Solidteknics pans are highly conductive, so in most cases, medium will be your new high. We recommend starting with a lower temperature before turning up the heat. With induction, you’ll rarely need to go above medium heat, and we strongly advise against using the boost setting.

NOTE: It's important to always match the size of the burner to the pan

To get the best out of your pan, it's important to match the size of your stovetop element to the size of your pan's base. The below graphic demonstrates how to determine if your element size is well-matched to the size of your pan. 

Blemishes & surface variations are normal

It’s very common for the look of your pan to change as you cook. Due to the non-nickel content of our ferritic stainless steel, your pan will stain less, though won't be shiny. Shiny is just for looks, we say, don't worry about how your pan looks - when it comes to Solidteknics cookware, what’s important is how it cooks!

Cooking tips & tricks

Struggling with food sticking to your stainless steel pans? A non-stick cooking surface is very achieveable with our nöni™ pans. Follow these simple tips to get the best performance out of your nöni™ pans, and help make cleaning up a breeze:

1. Start with a clean pan

Make sure that your pan is clean and smooth to the touch before you start cooking. Any stuck-on food will act as velcro, grabbing onto any food that you put in the pan.

2. Pre-heat your pan

It is important to allow your pans to heat up slowly over a medium heat. You can't see it with the naked eye, but stainless steel has a porous surface. As the pan slowly heats up, the metal expands and these pores gradually shrink, resulting in a smoother surface that is less prone to sticking. This is known as the Leidenfrost effect. You'll know your pan is hot enough by doing the water drop test.

NOTE: You should always heat your pans empty - even before adding fat/oil!

Wait for your pan to heat up before adding your oil. This prevents the oil from breaking down prematurely and becoming 'sticky'. Once the pan is hot and you've added your oil, allow the oil to also heat up before adding your food. Adding oil to the pan when it's hot causes the steel to become "static," which creates a temporary non-stick surface.

3. Do a quick water-drop test to check your pan is hot and ready to cook

At the right temperature, a drop of water in the pan will form a 'ball' that glides and dances across the surface of the pan. If this happens, you're pan is pre-heated to perfection and ready for you to add your oil! NOTE: This is past the point at which the water sizzles when it hits the pan's surface - see our video below!

Lower your heat. Our cookware is highly conductive. You likely won’t ever need more than a medium heat setting to get a hot pan. Do not rush the preheating process by using high heat. Since ferritic stainless steel is highly conductive and effective at holding heat, preheating on high might lead to overheating your pan (and burning your food).

4. Allow food to come to room temperature prior to cooking

Cold food (particularly protein rich foods like meat and poultry) is more likely to stick to a hot pan. A big piece of cold meat will likely drop the surface temperature to the point the food will bond with the pan (undoing all that preheating). Always allow food to come to room temperature prior to cooking, to help prevent sticking. It can also be beneficial to dab food with a cloth or paper towel to remove excess moisture.

5. Don't flip your food too early!

The rule of thumb for a stainless steel pan is to flip your food when you can do so easily. It takes time for the proteins to bind to each other, so be patient and resist the temptation to play with your food! If you've used a pre-heated and adequately oiled pan, your food will naturally lift and release from the pan once it's ready to flip.

Cleaning

Dishwashers: Solidteknics nöni™ cookware can go in the dishwasher, we do however highly recommend hot washing all cookware and knives by hand. If you do put your pan into the dishwasher, open the door on the dry cycle to avoid leaving the pan in a humid environment for a long period.

Only use non-abrasive cleaners and sponges. Coarse scrubbers and harsh cleaning solutions like bleach or household cleaners can scratch your stainless steel and damage its finish. And although baking soda and more abrasive scrubbers (like fine steel wool) can be useful in cleaning a burnished pan, beware that using these products might scratch or deminish the finish of your nöni™ cookware. Any scratches are only superficial and will not affect performance. There are no synthetic coatings or clad layers to worry about!

Note: We advise against leaving products such as baking soda and vinegar on your nöni™ pan for extended periods of time, as they can gradually corrode the metal.

To prevent water spots, dry your pot or pan immediately after washing. To clean water spots that do occur, simply dampen the surface of the pot or pan, rub it with a moist sponge that's been sprinkled with baking soda, and rinse as usual.

For cleaning chalky white spots (which can result from calcium buildup in the water): Bring a solution of 1:3 vinegar: water to a boil in the pan, let it cool, and then wash and dry as normal.

For stuck food bits (which can result from adding cold food to a hot pan—see above!): Scrub the pot with a non-abrasive sponge to get off any food bits you can, then fill the pot or pan with enough soapy water to cover the food, bring to a boil, and scrape (the food should come away easily).

IMPORTANT: Never submerge a hot stainless steel pan in cold water might as this can cause irreparable warping. Always allow the pan to cool before washing it.

For spots that won't budge, you can make a paste of baking soda and water and leave it applied to the problem areas for a few minutes before scrubbing.

Caring for your nöni™ pans

Clean after cooking 

We recommend cleaning your pans soon after cooking. We do not recommend storing foods in your pans for prolonged periods of time (i.e overnight in the fridge). 

Dry thoroughly before storing

After washing simply dry with a tea towel.

Hand washing is recommend, though nöni™ is dishwasher safe. If you choose to use a dishwasher, we recommend allowing to dry with an open door after the wash cycle is complete. You will likely experience more spotting if you use a dishwasher but these can always be polished out using the instructions above.

Long periods of storage may also encourage some spotting due to humidity in the air. Ideally, keep using your pans, or store in a dry place free from condensation.

Never add salt to cold water, wait until it reaches a 'rolling' boil. This can cause pitting corrosion, which leaves small dents at the bottom of your pan.

If small dents appear on your pan, it is perfectly safe to use and will not lose its function or durability. Pitting can occur due to a few different reasons, all of which are variables and something a manufacturer can't control i.e. the cooking method, minerals in liquids, water pH etc. It could be a case of pitting due to minerals that were dissolved in the water or in the water already. The most common culprit of this is sodium chloride, which is found in salt. If you add salt to your water before it's boiling, some of the salt will settle to the bottom of the pan, causing pitting to occur.

Why don't nöni™ pans stay as shiny as regular stainless steel cookware?

The reason other manufacturers use austenitic Nickel stainless steels (then make ply or multi-clad layers to compensate for its poor conductivity) is that these Nickel stainless steels (eg. 18/10, meaning 18% Chromium and 10% Nickel) are the shiniest when polished, and the most corrosion-resistant of all the stainless steels (there are many kinds). Because we won't use Nickel for health reasons, one trade-off is a slight decrease in stain and corrosion resistance.

Rust / mild isolated surface corrosion

If cared for correctly this will never be an issue, however if nöni pans are left in corrosive situations without maintenance, small rust spots and/or mild isolated surface corrosion can appear. To prevent this, clean and dry your pans immediately after use. 

If rust spots or unwanted spots do appear, these can easily be removed with the above instructions. If small marks do remain, these are no concern and will not affect performance, health or durability of your cookware. 

Cardboard packaging - recycle or compost.

Australia

An Australian company that makes pans to last a lifetime.

Founded by Australian-born, international chef equipment engineer/innovator, Mark Henry. 30 years experience in diverse manufacturing and patented innovations designed to last for multiple generations, such as Füri knives.  Mark says: "I'm tired of all the disposable consumer junk out there. We won't be just innovating, patenting and growing sustainable Australian-made innovations, but following a more holistic philosophy: an integration of personal and business life... and a strong contribution to the community now, and for future generations."

Patenting the world's first seamless, one-piece wrought iron pan, this is the only pan you'll ever need. Made for multi-generational use, this one-time purchase will save you time, money, resources and the environment. It is also seasoned with a natural, non-stick coating, which can be reapplied at home, and will work on any heat source.

Browse our pan selection from Solidteknics below.

Solidteknics was featured in our Top 10 Sustainable Solutions - learn more here about the other Top 10 Sustainable Solutions!